How to Cut in a Door Strike Using Router Cutting Jig from Major MFG. INC
If you've ever installed a door strike, precision in key. Using a router cutting jig from Major MFG. INC can make the job faster and more accurate. In this blog, we'll walk you through the steps we demonstrated in our video to expertly cut a door strike into an aluminum frame door.
Tools and Materials Needed:
- Router cutting Jig (HIT-41HS1)
- High-speed router
- Specialized router bit for aluminum (HIT-45RB4)
- Cutting paste
- Door Strike hardware (HES 5000 or 5700 Eletric Strike)
- Measuring tools (Tape Measure, Pencil)
- Protective gear (safety googles, gloves, and ear protection)
Step-by-step Process:
1. Placement of the Jig
- Start by marking the precise location of the aluminum door frame where the door strike will be installed. We used blue take to mark the placement location for the door strike.
- We than used the marking on the Jig to line up with our marking on the blue tape.
2. Apply Cutting Paste
- Apply a generous amount of cutting paste round the inside perimeter of the jig. This step reduces friction, keeps the route bit cool, and helps achieve a leaner cut.
- Let the router and bit do the work, don't force the tool.
3. Shaving the Frame
- Once the main cut is complete, remove the jig and check the fit of the door strike. If necessary, use the router or a file to shave small amounts from the frame until the door sstrike fit perfectly.
- Be patient during this step. Precision is essential to ensure the strike is flush and aligned properly with the latch.
4. Final Fitting
- Insert the door strike into the newly cut space and secure it with the provides hardware. Double-check the alignment to ensure the door closes and locks smoothly.
Why Use a Router Cutting Jig
The Major MFG. INC router cutting jig simplifies the process of cutting door strikes, providing a consistent template for precise cuts. This tool minimizes mistakes, saves time, and produces professional-grade results.
Tips for Success:
- Always wear protective gear when using a high-speed router.
- Take your time to measure and align the jig correctly before cutting.
- Keep the router bit sharp to achieve clean, smooth cuuts.
- Clean up any metal shavings or debris after cutting to avoid scratching the door or surrounding areas.
Using a router cutting jig from Major MGF. INC is a game changer for professionals. With these steps, you'll achieve a precise and secure fit for your door strike every time. Watch the full video and feel free to reach out with any questions or tips of your own!
Full Video on our YouTube Channel
https://youtube.com/shorts/UWljp4zRrvM?feature=share
Purchase the Kit below
Major Manufacturing Router Template Kit - With Spacer & Router Bit to – Central Security
